Android Gateway User Guide


  1. Download and Install APK
  2. Register Gateway



This guide will be explained how to register Gateway Using Andorid Devices(smart phone or Tablet)

You can setting and control on Andorid device. This guide will be explained how to install, integrate ThingPlus IOT, control the device on Android Device.



1. Download and Install APK


1) Download the application for Gateway registration and control gateway.


2) Install Downloaded apk.

apk install_2


2. Register Gateway

1) Run the installed application then press GET A GATEWAY ID button.

get a gateway id


2) Select created ID. (then Gateway ID will be copied)

pick a gateway id


3) Go to ThingPlus Portal on Browser (browser go to ThingPlus potal automatically after press below indecated button)

  • Login is needed.

go to portal


4) Select a Gateway management.

go to portal


5) Press (+) button on `Gateway management’.

go to portal


6) Press Request for Gateway Certificates or API Key button.

go to portal


7) select Android Basic at Gateway Model

go to portal

go to portal


8) Gateway ID will be pasted after paste by long tap in Gateway ID field.

go to portal


9) Press Get API key button then Press Register Gateway button.

go to portal


10) Input Gateway Name then select Device Model.

go to portal


11) Select Embeded Sensors

go to portal


12) Select Site Name

go to portal


13) Press Register a Gateway, Devices and Sensors button.

go to portal


14) Move to ThingPlus Gateway Sample app then Press Start` button.

go to portal


15) The Android integration for ThingPlus IOT is completed. You can decorate Dash Board and Rule on ThingPlus Potal.

  • Notice : If you sensor value is invisible, reload your browser.